|
The Carbon Series is focused on every aspect of audio performance, and the physical appearance is purely a byproduct of engineering for performance.
|
Scroll right to see measurement tab
|
- 210L
- Carbon Baltic birch plywood composite construction
- Low resonance
- 55 mm thick front baffle
- Well braced
- Standard with rubber O-ring feet
Shipping included in North America
Weights and Measures
Amplifier
DSP Features
Physical features
Output Power
Driver
Support
Weights and Measures
- 900 mm H x 722 mm W x 512 mm D
- 35.43" H x 28.43" W x 20.16" D
- Standing weight: 62 kg/139 lb
- Shipping weight: 75 kg/165 lb
Amplifier
- 2.4 kW
- Dual XLR inputs
- USB interface to PC
- Automatic Dual voltage 115/230V
DSP Features
- Parametric EQ, 5 filter types, 10 bands/ch
- High and low pass crossover, 10 slope options
- Adjustable Delay
- Adjustable level
- Adjustable limiting
- Auto on/off
- Front mounted display screen/controls
Physical features
- One piece aluminum Chassis/heat sink
- Passive cooling
- Black anodized finish
- 8 foot heavy gauge detachable power cord
- Hand made by Harbottle
Output Power
- 2400 watts RMS
- 5200 watts peak
- 120Db dynamic range
Driver
- 24 inch
- Hand made by Harbottle
- 4.5” Aluminum voice coil
- Underhung motor for high linearity
- High energy Neodymium magnet structure
- Full aluminum sleeve over pole
- Linear Inductance +/-5% through 80 mm p-p travel resulting in very low distortion, and clean bass.
- Cast Aluminum frame
- Anodized aluminum dust cap
- Solid Carbon fiber cone
- Half roll treated foam surround
- 80 mm P-P excursion
- Under spider venting
- Vented Pole piece
- Assembled with high temperature epoxies
Support
- Remote set-up and tuning
- Requirements:
- Audio measurement microphone - Omni Mic recommended
- Computer and internet connection
- USB or Ethernet connection to Harbottle amp
Shipping included in North America
Weights and Measures
Amplifier
DSP Features
Physical features
Output Power
Driver
Support
Weights and Measures
- 900 mm H x 722 mm W x 512 mm D
- 35.43" H x 28.43" W x 20.16" D
- Standing weight: 68 kg/150 lb
- Shipping weight: 77 kg/175 lb
Amplifier
- 4.4 kW
- Dual XLR inputs
- USB interface to PC
- Automatic Dual voltage 115/230V
DSP Features
- Parametric EQ, 5 filter types, 10 bands/ch
- High and low pass crossover, 10 slope options
- Adjustable Delay
- Adjustable level
- Adjustable limiting
- Auto on/off
- Front mounted display/controls
Physical features
- One piece aluminum Chassis/heat sink
- Passive cooling
- Black anodized finish
- 20 Amp rated mains input, power cord, circuit breaker/power switch
- 10 foot heavy gauge detachable power cord
- Hand made by Harbottle
Output Power
- 4400 watts RMS
- 10400 watts peak
- 120Db dynamic range
Driver
- 24 inch
- Hand made by Harbottle
- Underhung motor design for the ultimate linearity
- 5” Aluminum voice coil
- High energy 9″ diameter Neodymium magnet structure
- Full length Aluminum shorting ring for reduced distortion
- Linear Inductance +/-5% through 3 p-p travel resulting in very low distortion, and clean bass.
- Cast Aluminum frame
- Anodized aluminum dust cap
- Four layer 100% carbon fiber cone
- Treated foam surround
- 80 mm P-P excursion
- Under spider venting
- Assembled with high temperature epoxies
Support
- Remote set-up and tuning
- Requirements:
- Audio measurement microphone - Omni Mic recommended
- Computer and internet connection
- USB or Ethernet connection to Harbottle amp
TO BE ANNOUNCED
CEA 2010
|
Hz
10 12.5 16 20 25 32 40 50 63 80 100 |
L1
94 99 106 114 116 121 121.1 121.6 121.6 121 121 |
L2
99 103 110 117 120.7 124 126.3 127.3 126.7 126 125 |
Output numbers are conservative.
